CG320/ CG640

CG320/CG640

Infrared Thermal Imaging Camera

The body temperature measurement camera, specially designed for body temperature measurement. It’s equipped with a 160×120 resolution thermal detector. It helps to quickly detect fever

Overview

．Adopted latest version thermal detectors which has better NETD then former CX series models.
．Better image quality
．More stable in operation in lower temperature or in higher temperature
．Better accuracy in measurement
．Supports Giga Ethernet
．Added detail functions in Alarm setting and ROI setting on camera unit
．Compact design of camera case
．Control of lens motor for focusing and zooming is done by camera itself and does not need separate lens motor control board

	CG320	CG640	Remark
Resolution(Pixels)	384×288	640×480
Spectral response	8-14µm		Un-cooled LWIR micro-bolometer
Pixel Pitch	17µm
Thermal Sensitivity (NETD)	<50mK @f1.0, 30Hz, 300K	<50mK @f1.0, 30Hz, 300K	Shutter-less compatible
Operating temperature (ambient temperature)	-10℃ to 60℃ (Installing thermal cameras inside housing with built-in fan and heater to keep inside temperature in a certain range, for example, 15 to 25℃, is recommended for use in out of operating temperature range for accuracy in measurement)		Accuracy of ± 2℃ or ±2 % of reading: only when camera is in the range of ambient temperature and measurement is done in reasonable distance to the object.
Range of temperature measurement	CG320 & CG640: Normal temperature detection mode: -20 ~ 120℃ High temperature detection mode: 0 ~ 500℃ Medical mode: 20 ~ 50℃		Thermal camera set at normal temperature detection mode has better accuracy in measurement
Control of focus/zoom	CG series cameras include circuit for controlling lens motors for focusing and zooming respectively. Thermal imaging analyzer for CG320 and CG640 has icons for focusing “+”/”-” and zooming “+”/”-”.		CG series model itself controls lens motor for focusing and zooming, and no extra control board is not necessary for control of lens motors.
Video Output	BNC connector(composite), HDMI
Temperature data output	via Ethernet port(Giga E)
Data refresh rate	30Hz	50Hz
Video frame Rate	BNC connector(composite): NTSC 30Hz, PAL 25Hz HDMI: Selectable		HDMI: 480p, 576p, 720p, 1080i, 1080p selectable
Ethernet	Giga Ethernet(10/100/1000Mbps)
Lens	4.8mm to 250mm lenses, manual/motorized focus, zoom		Athermalized/Macro lens available
PC Software	CG320/CG640: Thermal imaging analyzer Camera controller Thermal report		Quad Channel Analyzer: 2019-08 release